Though some customers have produced amazing results with these lights, it is now 2019, and we are moving on from our original 'Make Light' series grow lights. Our 3W LED lights are only available by email request, and will have a longer lead time.
They were good, as far as blurple lights go, but results from the 70W quantum board are now on par with 120W of 3W LEDs, so it's time to discontinue this product.
Using two 60W LED Drivers (up to 105V at 600mA), and active cooling (i.e. fan), on our 200x200x40mm heatsink.
120W is plenty for a small area. At this wattage, you're probably going to be using it for flowering.
But you can let us know if you want a specific spectrum, and whether you need a 12V adapter. Our adapters can run up to 20 fans, so they are a once-off purchase.
Parts list for example Flowering spectrum:
5 x 430-440nm LEDs (Blue) = R50 5 x 440-450nm LEDs (Blue) = R50 5 x 450-460nm LEDs (Blue) = R50 5 x 460-470nm LEDs (Blue) = R50 8 x 3000-3500K LEDs (Warm White) = R80 8 x 620-630nm LEDs (Red) = R80 8 x 638-642nm LEDs (Red) = R80 8 x 655-660nm LEDs (Red) = R80 8 x 665-670nm LEDs (Red) = R80 1 x 200x200mm Aluminium heatsink = R295 1 x Switch cable = R30 4 x 15-LED PCB = R100 2 x LED Driver 54V-105V = R480 Consumables fee (Thermal grease, solder, epoxy) = R30 2 x SUNON Maglev fans = R180